|
Applications: Ideal for dewatering flat surfaces.
Item no.: 94627
Flat suction submersible pump with electronic control for efficiently removing clean water from floors and other surfaces. The pump can reduce the water level to approximately 1 mm, making it particularly suitable where as little residual water as possible is required.
The 4-stage adjustable sensor switch detects the water level, while the integrated electronic control provides automatic shut-off.
Product features
- Flat suction down to approx. 1 mm
- Flow rate up to 7,000 l/h
- Maximum delivery head of 8 m
- Maximum immersion depth of 7 m
- 4-stage adjustable sensor switch
- Automatic shut-off via integrated electronic control
- Integrated non-return valve
- Impact-resistant pump housing
- Thermal motor protection
- Durable Noryl impeller
- Stainless steel shaft
- Mechanical seal
- Practical carrying handle
- 10 m power cable
Applications
Ideal for pumping water from floors and other surfaces down to a very low residual water level. Also suitable for transferring and emptying water from tanks and cisterns.
Hose connections
- 1 1/2" female thread
- 1 1/2" male thread
- 32 mm hose connection
- 1" male thread
- 25 mm hose connection
Technical data
| Mains voltage |
230 V |
| Frequency |
50 Hz |
| Motor power (P1) |
400 W |
| Protection rating |
IPX8 |
| Maximum flow rate |
7,000 l/h |
| Maximum delivery head |
8 m |
| Maximum immersion depth |
7 m |
| Maximum particle size |
1 mm |
| Flat suction |
Down to approx. 1 mm |
| Maximum water temperature |
35 °C |
| Connection thread |
1 1/2" female thread |
| Cable length |
10 m |
| Length |
280 mm |
| Width |
200 mm |
| Height |
280 mm |
| Net weight |
4.3 kg |
|
