|
|
|
Keyless chuck? Precision execution
The drill chuck ensures safe, powerful clamping of cylindrical tools with high concentricity.
Area of application: stationary drilling, turning and milling machines.
Corresponding taper mandrel for holding the drill chuck in the Machine tool required.
Clamping range mm: 1.0-16.0 mm
Recording: B18
Diameter D: 54 mm
Total length L: 112.2 mm
Length L1: 102 mm
| Clamping range |
Recording |
Dimension |
| |
|
D |
L1 |
L |
| 1,0-16 mm |
B 18 |
54 |
102 |
112,2 |
Rotwerk item no .: 80144
Note: an additional taper mandrel is usually required to accommodate the drill chuck in the machine tool. The machine tool usually has a Morse taper holder (MK), for example MK2 - this Morse taper (MK) is inserted into the holder of the machine tool (e.g. drilling quill, Reistock quill of the lathe or milling spindle of the milling machine) - the drive takes place here by pure frictional connection - i.e. the The cone connection is sufficient for the transmission of the torque.
The chuck itself is connected to the tapered mandrel with a so-called short taper (B-taper).
When ordering the correct taper mandrel, you only need to know the mounting of your machine tool (MK) and the mounting of the drill chuck (B). For example, if your machine tool has an MT2 taper mount - you need a taper mandrel for this drill chuck: MT2 / B18.
Shipping weight: 1.41 kg
Item weight: 1.41 kg
|
|
|
Weight: 0.300 Kg |
 |
 The item is in stock. |
|
|
|
|
