|
Dividing attachment T 100 diameter 100 mm
Gear ratio: 1:72
Worm drive module: 1 with direct division 360 ° / 1 ° division: 2 "per division, division with vernier: 10" Centric center bore with MK2 (to accommodate taper mandrel or point)
Center height: 68 mm (center with vertical mounting) Height with horizontal mounting: 73 mm
Round table 100 mm diameter, with 8 mm T-slots, slot nuts for vertical assembly: 12 x 10 mm
Direct dividing head for vertical and horizontal assembly
The T 100 is used when there are milled or cut-outs distributed over the workpiece (e.g. milling of circles, circular grooves, gears, splined shafts, helical grooves, etc.). With the help of the perforated disk set (Art .: 15621), the dividing head can also be used for indirect dividing will. An 80 mm jaw chuck can be clamped onto the rotary table using an adapter flange (item: 15620). Suitable for milling machine EFM 200 DS and other machines from a machine table of 100 mm width.
Recommended accessories (not included):
Dividing attachment Art.-No .: 1821518
Counter tip Art.-No .: 1821519
Adapter flange for jaw chuck Art.-No .: 1821520
Perforated disc Art.-No .: 1821521
Three-jaw chuck Art.-No .: 80215
Four-jaw chuck Art.-No .: 80020
Faceplate Art.-No .: 80013
Shipping weight: 8.75 kg
Item weight: 8.75 kg
|
