|
Item no.: 55202
The GTB 16/605 is a robust pillar drill with a 600 W motor, keyless drill chuck and 5 speed settings. It is designed for precise drilling work in the workshop and features an MK2 spindle taper and B16 drill chuck taper.
The 200 × 200 mm drilling table is height-adjustable, rotates 360° and tilts ±45°. The table also features coolant collection grooves. An adjustable drilling depth stop makes repetitive and precise drilling easier.
Features and benefits
- 600 W motor
- V-belt drive with 5 speed settings
- Spindle speed 630–2,700 rpm
- V-belt tensioning system
- Ball-bearing drilling spindle
- Keyless drill chuck 1–16 mm
- MK2 spindle taper
- B16 drill chuck taper
- 200 × 200 mm drilling table
- Height-adjustable table, rotates 360° and tilts ±45°
- Coolant collection grooves in the drilling table
- Adjustable drilling depth stop
- Maximum chuck-to-table distance: 290 mm
- Maximum chuck-to-base distance: 415 mm
- Folding chip guard
- On/off switch with no-voltage release
Technical data
| Mains voltage |
230 V |
| Frequency |
50 Hz |
| Operating mode |
S1 |
| Protection class |
I |
| Motor power P1 |
600 W |
| Spindle travel |
60 mm |
| Spindle speed |
630–2,700 rpm |
| Speed settings |
5 |
| Throat depth |
125 mm |
| Drill chuck capacity |
1–16 mm |
| Drill chuck taper |
B16 |
| Spindle taper |
MK2 |
| Drilling table |
200 × 200 mm |
| Base |
235 × 355 mm |
| Column diameter |
60 mm |
| Power cable |
200 cm |
| Noise level LWA |
75 dB |
| Dimensions (L × W × H) |
540 × 300 × 850 mm |
| Net weight |
31 kg |
| Gross weight |
32 kg |
| GTIN |
4015671530073 |
Suitable accessories
|
