|
Item no.: 55208
The GTB 20/812 R+L is a powerful 400 V pillar drill with an 800 W motor, keyless drill chuck and forward/reverse operation. With 12 speed settings from 210 to 2,500 rpm, the machine is suitable for demanding drilling applications in the workshop.
The ball-bearing drilling spindle features an MK2 spindle taper and B16 drill chuck taper. The large 260 × 260 mm drilling table is height-adjustable, rotates 360° and tilts ±45°. The machine also features an adjustable drilling depth stop, folding chip guard with microswitch, no-voltage release and emergency stop.
Features and benefits
- 400 V power supply
- 800 W motor
- Forward/reverse operation
- V-belt drive with 12 speed settings
- Spindle speed 210–2,500 rpm
- V-belt tensioning system
- Ball-bearing drilling spindle
- Keyless drill chuck 1–16 mm
- MK2 spindle taper
- B16 drill chuck taper
- 80 mm spindle travel
- 260 × 260 mm drilling table
- Height-adjustable table, rotates 360° and tilts ±45°
- Coolant collection grooves in the drilling table
- Adjustable drilling depth stop for precise drilling
- Maximum chuck-to-table distance: 270 mm
- Maximum chuck-to-base distance: 520 mm
- Folding chip guard with microswitch
- On/off switch with no-voltage release
- Emergency stop
Technical data
| Mains voltage |
400 V |
| Frequency |
50 Hz |
| Operating mode |
S2 15 min. |
| Protection class |
I |
| Motor power P1 |
800 W |
| Spindle travel |
80 mm |
| Spindle speed |
210–2,500 rpm |
| Speed settings |
12 |
| Rotation |
Forward / reverse |
| Throat depth |
170 mm |
| Drill chuck capacity |
1–16 mm |
| Drill chuck taper |
B16 |
| Spindle taper |
MK2 |
| Drilling table |
260 × 260 mm |
| Base |
240 × 410 mm |
| Column diameter |
70 mm |
| Power cable |
200 cm |
| Cable type |
H07RN-F |
| Noise level LWA |
76.3 dB |
| Dimensions (L × W × H) |
650 × 340 × 1,010 mm |
| Net weight |
48 kg |
| Gross weight |
51 kg |
| GTIN |
4015671540096 |
Suitable accessories
|
