|
Furnishing:
• V-belt drive, speed adjustment by means of step pulley
• V-belt tensioning system
• Ball bearing drilling spindle
• Keyless chuck 1-16 mm
• Spindle holder MK2 and drill chuck cone B16
• Drilling table size 260 x 260 mm
• Height-adjustable drilling table, tiltable +/- 45 ° and swiveling 360 °
• Drill table with gutters for coolant
• Adjustable drilling depth stop for precise drilling
• Max. Distance between chuck and drilling table 270 mm
• Max. Distance between chuck and stand 520 mm
• Base size 240 x 410 mm with elongated holes for vice fastening
• Foldable chip protection with micro switch
• On / off switch with zero voltage release
• Emergency switch
Optional accessories:
• #38318 machine vice 75mm
• #38319 machine vice 100mm
• #38320 machine vice 125mm
• #38321 machine vice 150 mm
• #38307 2 pieces of T-nut 13.5 x 8.5 mm M10
• #38327 MK2 drill set, 8 pcs.
• #38345 ring gear drill chuck B16 16mm
| Rated voltage: |
|
230 V |
| Frequency: |
|
50 Hz |
| Operating mode: |
|
S2 15min |
| Protection class: |
|
I |
| Power P1: |
|
800 W |
| Spindle: |
|
80 mm |
| Spindle speed: |
|
210-2500 min-1 |
| Number of stages: |
|
12 |
| Outreach: |
|
170 mm |
| Max. Chuck capacity: |
|
16 mm |
| Min. chuck capacity: |
|
1 mm |
| Taper: |
|
16 B |
| Spindle taper: |
|
2 MK |
| Drill diameter for steel: |
|
20 mm |
| Table width: |
|
260 mm |
| Tray depht: |
|
260 mm |
| Footplate LxW: |
|
240 x 410 mm |
| Column diameter: |
|
70 mm |
| Cable length: |
|
200 cm |
| Cable type: |
|
H05RN-F |
| Noise declared value: |
|
71 dB |
| Length: |
|
650 mm |
| Width: |
|
340 mm |
| Height: |
|
1010 mm |
| Net. weight: |
|
46,5 kg |
| Gross weight: |
|
49,5 kg |
| Item number: |
|
55206 |
|
